DCS Ice Maker All Indicators Flashing Error Code
When every light on a DCS RF15I ice maker display blinks nonstop, the board and the control panel have stopped communicating.
Model Reference
DCS RF15I Outdoor Ice Maker Repair
The RF15I is no longer sold new, but many are still making ice on Bay Area patios, and they can usually be diagnosed and kept going.
- DCS repairOutdoor & indoor
- 11appliance families
- 61models covered
- 60error codes
- 150Bay Area places
- Mon–Sat8 AM – 7 PM visits
Model number
RF15I
About this model
Model overview
The RF15I is a 15-inch outdoor ice maker from the DCS outdoor refrigeration series. It is discontinued, meaning it is no longer sold new. An older unit has had years of weather, so we pay attention to cabinet corrosion, hose condition, door seal and wear on the parts that move or sense.
The readouts DCS documents for this model
Three display messages are documented for the RF15I. When every indicator flashes together, the main board and the user interface have lost communication (details). When ICE flashes without an alarm, the condenser temperature sensor has failed and the machine keeps running without adapting to ambient conditions (details). When OFF flashes once a second without an alarm, the bin sensor has failed and the machine goes to the OFF state (details).
What an aging unit tends to show
- Ice that becomes cloudy, small or sparse
- Slow refill after you empty the bin
- A drip or stain near the base
- A cabinet that looks fine but runs loudly
How we decide what to repair
For a discontinued model the question is whether the unit is worth repairing, and we answer it with facts from the diagnosis rather than a guess. Our article on when to repair versus replace lists the factors we weigh, such as parts availability and the condition of the rest of the machine, and the choice stays yours.
Your quick checks
Power, breaker, GFCI, the supply valve position, a clear grille and a closed door. Write down which indicator is flashing before you reset once.
Keeping an older ice maker going
Regular surface cleaning of the grille and bin, a clear drain screen and a supply valve that is fully open prolong the life of an older machine. If it starts to leak, shut the supply and stop; a small leak left alone under an island can damage cabinetry and wiring around it.
Label and next steps
The label is usually found inside the cabinet wall or behind the kickplate. Newer 15-inch versions include the RF15IL3 and RF15IR3. Read the DCS ice maker repair page and the ice maker guide to see how a visit works.
Frequently asked questions
No. It is a discontinued model.
DCS describes it as a condenser temperature sensor error; the machine keeps running but does not adapt to ambient conditions.
A bin sensor error, with the machine moving to the OFF state and no audible alarm.
It depends on parts availability and the condition of the unit, which we judge during diagnosis.
The board and the interface are not communicating, so the unit needs a diagnosis rather than repeated resets.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Diagnostics
Error codes for this appliance
Fix it right
Repair service
DCS Ice Maker Repair in the Bay Area
Repair for DCS outdoor ice makers in San Francisco and the Bay Area: no ice, slow ice, flashing lights and water line…
Models
Other models
Book a repair
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Phone
(415) 969-2271
Hours
Mon–Sat: 8:00 AM – 7:00 PM
Service area
San Francisco Bay Area, California