DCS Ice Maker All Indicators Flashing Error Code
When every light on a DCS RF15I ice maker display blinks nonstop, the board and the control panel have stopped communicating.
Model Reference
DCS RF15IL2 Left-Hinge Ice Maker Repair
If your RF15IL2 is not keeping up with the party, start by sorting water, drain and air.
- DCS repairOutdoor & indoor
- 11appliance families
- 61models covered
- 60error codes
- 150Bay Area places
- Mon–Sat8 AM – 7 PM visits
Model number
RF15IL2
About this model
Model overview
The RF15IL2 is a left-hinge 15-inch outdoor ice maker in the DCS outdoor refrigeration series. We do not hold sales-status details for this model, so rather than speak about availability, we focus on what you can do today: gather the label, note the symptom and let us diagnose.
Symptoms by cause group
Water side: small cubes, no cubes or water at the base. Airflow side: slow production and a warm cabinet. Electrical side: lights out, no response, or repeated tripping at the outlet. Sensor or control side: flashing indicators with no ice. A visit places the unit in the right group quickly.
Documented display messages
The three readouts DCS lists for the related RF15I are described on our code pages: all indicators flashing, ICE flashing and OFF flashing. Your unit may match them; note what it shows.
Island and cabinet considerations
- A drain that runs under an island may be hard to see; water pooling beneath cabinetry is a clue.
- Cut-outs with tight clearance trap heat.
- Coastal air attacks hose clamps and exposed metal.
- A kinked supply line behind the unit starves it of water.
Simple owner actions
Confirm power at the outlet, open the supply valve fully, wipe the grille and shut the door firmly. If you see a leak, close the valve and stop. No panel removal, no probing near the drain.
What happens during the visit
We start by listening to the machine and looking at its indicators, then check the supply, the drain and the airflow before touching anything electrical. After the diagnosis you receive a written estimate, and the repair starts only when you approve it. If something unexpected shows up, we stop and talk it through.
Because the sales status of this model is not on file with us, we avoid promising anything about parts until the diagnosis is done. What we can promise is clarity: you will know what failed, what the options are and what the written estimate says before any repair starts.
Identification and links
Use our label-finding guide to confirm RF15IL2, since several 15-inch models look alike: RF15IL3, RF15IR3 and RF15I. Full service details are on the DCS ice maker repair page and in the ice makers overview.
Frequently asked questions
They are different model numbers, and we confirm the exact one from the label before we arrive.
Usually inside the cabinet wall or behind the kickplate.
Intermittent water may come from the supply, the drain or condensation, and a diagnosis tells which.
One controlled reset is reasonable. Repeated resets hide the pattern we need to see.
Yes, and we check the cut-out clearance and drain route as part of the visit.
Model-information disclaimer. Confirm your exact model number and specifications with your appliance documentation before booking a repair. Model pages are for identification and compatibility reference.
Diagnostics
Error codes for this appliance
Fix it right
Repair service
DCS Ice Maker Repair in the Bay Area
Repair for DCS outdoor ice makers in San Francisco and the Bay Area: no ice, slow ice, flashing lights and water line…
Models
Other models
Book a repair
Tell us what’s wrong — we’ll take it from there
Share a few details and we’ll confirm an appointment. Prefer to talk? Call us and we’ll help right away.
Phone
(415) 969-2271
Hours
Mon–Sat: 8:00 AM – 7:00 PM
Service area
San Francisco Bay Area, California